Product Description
Temperature Range : Ambient +5°C - 250°C
The Oven/Incubator provides a stable temperature environment for general purpose applications and features a digital PID controller for precision. The controls feature an auto alarm and the insulated chamber ensures low energy consumption.
2 Year Warranty
The NE1V Series comes with a 2 year warranty as standard, we also offer free advice and support for our Oven/Incubator.
MADE IN GREAT BRITAIN
The NE1V Series is made here in Great Britain with the highest quality of materials.
Features and Benefits
Gravity convection chamber with exhaust outlet.
2 Year Warranty.
Before leaving our factory every oven is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
Clifton lab oven/incubators feature intuitive easy to use controls with dual temperature display showing actual and set values.
Accessories available to suit wide range of applications.
The oven/incubator chamber is constructed from high quality stainless steel with high efficiency thermal insulation, contained within an outer steel housing with anti-bacterial paint finish.
Door Features
Door Configuration
Single insulated door, lockable with 2 point door engagement for an even seal.
Door Alarm
Door open, heating interrupted, delay before door sounder chimes until door closed, heating resumes.
Safety Features
- Switching on, the controls undergo an automatic diagnostic check.
-
Over temperature alarm is automatically set 5°C above set point.
-
Door open – heating is interrupted, after a short delay a door sounder chimes until door is closed, heating resumes.
- Fitted with Class 1 over temperature thermostat for overall unit protection.
Energy Consumption
0.02kWh at 37°C
0.23kWh at 150°C
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and consumption measured at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.
Controls
Featuring PID Digital, LED display showing actual and set temperature, resolution 0.1°C with intuitive controls. Indicators for heating, timer and alarm.
Notes
Before ordering please check the room or building access where this unit will be installed and electrical power requirements. Temperature fluctuation measurements are based on temperature readings on shelf in centre of the chamber. Allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling. Do not place in direct sunlight or near a heat or cold source.
Specifications
| Product Code | NE1V-32 | NE1V-56 |
| Chamber Capacity | 32 Litres | 56 Litres |
| Temperature Range | Ambient + 5°C - 250°C | |
| Temperature Control | PID Digital, LED display showing actual or set temperature, resolution 0.1°C | |
| Temperature Sensor | pt100 with control diagnostics at power up | |
| Temperature Fluctuation 37°C | ±0.3°C | |
| Temperature Variation 37°C | ±1.0°C | |
| Temperature Fluctuation 150°C | ±0.5°C | |
| Temperature Variation 150°C | ±2.0°C | |
| Temperature Heat Up 150°C | 30 Minutes | 40 Minutes |
| Temperature Door Open Recovery 150°C | 16 Minutes | |
| Timer | Run back timer 00:01 to 99:59 (hh:mm) at set temperature | |
| Temperature Alarm | Over temperature alarm automatically set 5°C above set temperature | |
| Shelves Fitted & Max. | 1 wire / 2 max | 2 wire / 4 max |
| Shelving Locations | Available 80mm spacing | |
| Heater power | 1050W | |
| Voltage | 230V 50-60Hz | |
| Energy use at 37°C | 0.02kw/h | |
| Energy use at 150°C | 0.23kw/h | |
| Dimensions | ||
| External (mm) | 740w x 460d x 560h | 740w x 610d x 600h |
| Internal (mm) | 400w x 270d x 320h | 400w x 390d x 360h |
